Garmin gps 400 Guida Utente
GPS 400 Pilot’s Guide and Reference
6-2
SECTION 6
WPT PAGES
Entering a waypoint identifier:
1) Select the desired WPT page and press the
small right knob to activate the cursor.
2) Turn the small right knob to select the first
character of the waypoint’s identifier.
3) Turn the large right knob to select the next
character field.
4) Turn the small right knob to select the desired
character.
5) Repeat steps 3 and 4 until the identifier is
selected, then press the ENT Key.
6) To remove the flashing cursor, press the small
right knob.
Entering a waypoint facility name or city
location:
location:
1) Select the Airport Location Page, NDB Page,
or VOR Page from the WPT Page Group (as
described on the preceding page).
described on the preceding page).
2) Press the small right knob to activate the
cursor.
3) Turn the large right knob to select the facility
name or location (city) field.
4) Turn the small right knob to select the desired
character (Figure 6-2).
Figure 6-2 Airport Location Page
5) Turn the large right knob to select the next
character field.
6) Repeat steps 4 and 5 until the facility name or
location is selected, then press the ENT Key
(Figures 6-3 and 6-4).
(Figures 6-3 and 6-4).
Figure 6-3 Airport Location Page
Figure 6-4 VOR Page
7) To remove the flashing cursor, press the small
right knob.