Garmin eTrex Summit Manuale Utente

Getting Started

Calibrating the Electronic Compass

The eTrex Summit’s Electronic Compass needs to be

calibrated outdoors after the batteries have been changed
before using the unit for navigation. Failure to calibrate
the Electronic Compass can result in gross inaccuracy of
the compass feature.

Compass Calibration:

1. Press the PAGE Button until the MENU Page is

displayed.

2. Using the UP or DOWN Button, highlight ‘Calibrate’

and press the ENTER Button.

3. Using the UP or DOWN Button, highlight ‘Compass’

and press the ENTER Button.

4. With ‘Start’ highlighted, press the ENTER Button to

begin the calibration.

5. Making sure that the unit is level, rotate the eTrex

Summit slowly two turns in the same direction. On
the display there will be a speed scale that indicates
whether you are rotating the unit ‘Too Fast’, ‘Too
Slow’ or ‘Just Right’. A message will be displayed
when the compass has been successfully calibrated.

NOTE: The eTrex Summit needs to be level
during compass calibration and use. If the unit
is tilted on either axis the compass feature will
become less accurate.

The Speed Scale indicates whether
you are ‘TOO SLOW’, ‘JUST
RIGHT’ or ‘TOO FAST’.

Helpful Compass Tips

1. The Electronic Compass will

need to be recalibrated out-
doors every time the batter-
ies are changed.

2. The Electronic Compass will

not be accurate when used in
a car or around items that
radiate a magnetic ﬁ eld.

3. When using the compass, hold

the unit as level as possible.
The more that the unit is tilted,
the less accurate the compass
will become.

Calibrating the

Compass

190-00193-00_0D.indd

02/12/01, 10:08 AM