Garmin eTrex Summit Manuale Utente

34

Using the Project feature, the eTrex Summit can create 

a waypoint at a specifi ed distance and bearing using an 
existing waypoint as a reference.  You can change the 
name, symbol and elevation on this page. 

1.  Select a waypoint on the WAYPOINT PAGE and press 

ENTER.

2.  Using the UP or DOWN Button, highlight the ‘PROJ-

ECT’ Button and press ENTER. The PROJECT WAY-
POINT Page will be displayed and a numeric name 
will be assigned to the new waypoint.

3.  The distance fi eld will be highlighted by default.  

Press ENTER to display the EDIT NUMBER page.

4.  With the EDIT NUMBER Page displayed, pressing the 

DOWN Button will move the highlight to the next 
number in the fi eld.  With the desired digit selected, 
press ENTER to activate the drop down number list.

5.  Using the UP or DOWN Button select the correct 

number then press ENTER. When all numbers are 
entered correctly, highlight ‘OK’ and press ENTER.

6.  Using the DOWN Button, highlight the bearing fi eld 

and press ENTER to display the EDIT ANGLE Page.

7.  With the EDIT ANGLE Page displayed, pressing the 

DOWN Button will move the highlight to the next 
number in the fi eld.  With the desired digit selected, 
press ENTER to activate the drop down number list.

8.  Using the UP or DOWN Button select the correct 

number then press ENTER. When all numbers are 
entered correctly, highlight ‘OK’ and press ENTER.

9.  The name, symbol and elevation can be changed 

on this page as well.  When all changes have been 
made, highlight ‘OK’ and press ENTER to save the 
waypoint.  Highlight ‘GOTO’ and press ENTER to 
save the waypoint and begin direct navigation to the 
point.

190-00193-00_0D.indd

02/12/01, 10:08 AM

34