Garmin eTrex Summit Manuale
36
What is a Track Log?
The eTrex Summit draws an electronic “breadcrumb” trail on the Map Page as you travel.
This breadcrumb trail is called the Track Log. The Track Log contains information about each
point it plots along the way, including time, position, and elevation. After a Track Log is saved
in the unit’s memory, you can use the Track Log information to navigate. You can also review
the saved Track Log on the map, review the Track Log’s elevation profile, and use the Track
Setup page to change the way tracks are recorded.
point it plots along the way, including time, position, and elevation. After a Track Log is saved
in the unit’s memory, you can use the Track Log information to navigate. You can also review
the saved Track Log on the map, review the Track Log’s elevation profile, and use the Track
Setup page to change the way tracks are recorded.
You can save a total of ten Track Logs in the eTrex Summit. The Track Log starts record-
ing as soon as the unit gets a location fix. If you want to use the ‘TracBack feature (see page
38), it is recommend that you clear the Track Log before you start traveling. The percentage
of memory used by the current Track Log is displayed at the top of the Tracks page. After
the Track Log is ‘CLEARED’, it shows zero percent. When the display shows 99%, the most
recent track points will start overwriting the beginning track points. In order to avoid losing
any track points, you should save the Track Log before it reaches 99% of memory usage.
38), it is recommend that you clear the Track Log before you start traveling. The percentage
of memory used by the current Track Log is displayed at the top of the Tracks page. After
the Track Log is ‘CLEARED’, it shows zero percent. When the display shows 99%, the most
recent track points will start overwriting the beginning track points. In order to avoid losing
any track points, you should save the Track Log before it reaches 99% of memory usage.
Saved tracks can be used for navigation later. After a Track Log is saved, the saved track
will have a beginning (BEGIN) point and an ending (END) point.
To save the current Track Log:
1. With the MENU Page displayed, highlight ‘TRACKS’ and press ENTER. The TRACK LOG
Page appears.
2. Press the
UP or DOWN button to highlight ‘SAVE’, then press ENTER. The SAVE BACK
THROUGH window appears giving you a time frame for saving a track or ‘ENTIRE LOG’.
3. Press the
UP or DOWN button to select the desired option. Press ENTER. The saved track
appears graphically on a sub-page.
4. Press the
UP or DOWN button to select ‘OK’. Press ENTER. The track is now saved and
appears in the ‘SAVED TRACKS’ list on the TRACK LOG Page.
You need to save the track log first before
you can use the TracBack feature.
you can use the TracBack feature.
Menu Page
Track Log Page
NOTE:
For effective use of the ‘Trac-
Back’ feature, save the active track,
then the Track Log BEFORE starting
a new trip.