Garmin g1000 m20m Manuale Utente
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
SECTION 7 – NAVIGATION
7-2
4. Continue turning the small FMS knob to scroll
through the list and highlight the desired
waypoint or airport.
waypoint or airport.
5. Press the ENT key to confirm the selection.
Press ENT again to activate a Direct-to.
To re-center the CDI (HSI) needle to the
same destination waypoint:
same destination waypoint:
1. Press the Direct-to (
) key, followed by
pressing the ENT key twice. NOTE: If a missed
approach point (MAP) is the current destina-
tion, the approach will be canceled.
approach point (MAP) is the current destina-
tion, the approach will be canceled.
To manually define the Direct-to course:
1. Press the
Direct-to (
) key.
2. Turn the FMS knobs to select the destination
waypoint.
3. Press the ENT key to confirm the selected way-
point, then turn the
large FMS knob to highlight
the Direct-to Course field.
4. Turn the FMS knobs to select the desired course
and press the ENT key.
5. Press the ENT key again to begin navigation
using the selected destination and course.
Canceling Direct-to Navigation:
1. Press the Direct-to (
) key.
2. Press the MENU key to display the Direct-to
options menu.
3. With ‘Cancel Direct-To NAV’ highlighted, press
the ENT key. If a flight plan is still active, the
G1000 resumes navigating the flight plan
along the closest leg.
G1000 resumes navigating the flight plan
along the closest leg.
Figure 7-3 Canceling Direct-to Navigation
Direct-to Navigation from the PFD
Figure 7-4 PFD Direct-to Window
WPT Symbol
Identifier
Facility Name
WPT Location
Nearest WPT
Bearing to WPT
Distance from WPT
Lat/Lon
Course to Selected WPT
Flight Plan WPT
1. Press the Direct-to key (
).
2. Turn the large FMS knob to place the cursor in
the desired selection field.
3. Turn the small FMS knob to begin selecting the
desired identifier, location, etc.
4. Press the ENT key.
5. The cursor is now flashing on ‘ACTIVATE?’.
5. The cursor is now flashing on ‘ACTIVATE?’.
Press the ENT key again to activate.
Cancelling Direct-to Navigation:
1. Press the Direct-to (
) key.
2. Press the MENU key to display the Options
Window. The cursor will be flashing on ‘Cancel
Direct-to NAV’.
Direct-to NAV’.
3. Press the ENT key to cancel the direct-to.