Garmin 190-00556-10 Manuale Utente

Pagina di 64
Quest Owner’s Manual 
49
A
PPENDIX
 > 
S
PECIFICATIONS
Specifications
Physical Specifications
Size: 4.5” W x 2.2” H x 0.9” D (11.4 x 5.59 x 2.29 cm) 
Weight: 5.5 oz (155.92 g) 
Display:  1.5” W x 2.2” H, 256-color, high resolution, transflective 
TFT (160 x 240 pixels), backlit. Compatible with polarized 
sunglasses.
Case: Rugged, fully gasketed, water resistant to IEC 60529 IPX7 
Antenna: Flip-up patch. MCX-type connector for remote antenna.
Temp. Range: 5° to 140° F (-15° to 60° C) 
Keypad: Nine multifunction backlit keys 
Performance Specifications
Receiver: WAAS-enabled, 12 parallel channel receiver
Acquisition Times
1
 
Warm: Approximately 15 seconds
Cold: Approximately 45 seconds 
AutoLocate
®
: Approximately 2 minutes
Update Rate: Once per second, continuous 
GPS Accuracy 
Position
2
: <15 meters (49 feet), 95% typical 
Velocity: 0.05 m/s steady state
DGPS Accuracy
Position
2
: 3–5 meters (10–16 feet), 95% typical 
Velocity: 0.05 m/s steady state
Dynamics: Performs to specifications to 6 g’s
Interface: USB 1.1 device
Data Storage: Indefinite; no memory battery required
Map Storage: Internal
Quest: Available storage for uploaded maps
Quest 2: Full map coverage 
Power Specifications
Source:  12/24 VDC with car adapter up to 36 V and internal lithium-ion 
battery
Battery Life
3
: Up to 20 hours (typical use)
Usage: 6 watts maximum at 13.8 VDC
Fuse: AGC/3AG - 1.0 Amp High breaking capacity, rated 1500 A
1
 Warm = all data known; Cold = position, time and almanac known; 
AutoLocate = almanac known, position and time unknown.
2
 Subject to accuracy degradation to 100 m 2DRMS under the U.S. DOD-
imposed Selective Availability Program. 
3
 The lithium-ion battery loses capacity as its temperature decreases. Use of 
backlight and tones also reduces your battery life.
Changing the Fuse
The tip of the 12-volt adapter contains an 
AGC/3AG 1 Amp, high-breaking capacity, 1500 
A rated fuse. To change it, unscrew and remove 
the black, round end piece. Remove the metal tip 
and then remove and replace the fuse.
Fuse