Garmin gpsmap 2006, 2010 Manuale Utente
25
Reference
Creating Waypoints
Creating and Using Waypoints
The GARMIN GPSMAP 2006/2010 stores up to 3000 alphanumeric waypoints with a user-defi ned
icon, comments and depth (depth will automatically be displayed if valid sonar data is being received. See
pg. 70) available for each waypoint. Waypoints can be created using two basic methods:
pg. 70) available for each waypoint. Waypoints can be created using two basic methods:
• ENTER/MARK key– used primarily for marking your present position. You may also enter a new
waypoint’s position coordinates manually (from a chart, etc.).
• Graphically– allows you to defi ne a new waypoint position from the map display using the ARROW
KEYPAD.
ENTER/MARK Key
The GARMIN GPSMAP 2006/2010’s ENTER/MARK key lets you quickly capture your present
position— or cursor or map item position— in order to create a new waypoint. You must have a valid
position (2D or 3D) fi x to mark your present position. (This can be determined by looking at the GPS tab
on the Main Menu.) When you move the cursor over a map item, you will see a highlighted description of
that item. You may also use this option to manually enter waypoint coordinates.
position (2D or 3D) fi x to mark your present position. (This can be determined by looking at the GPS tab
on the Main Menu.) When you move the cursor over a map item, you will see a highlighted description of
that item. You may also use this option to manually enter waypoint coordinates.
To mark your present position:
1. Press and hold the ENTER/MARK key until the ‘New Waypoint’ window appears then release it. You will
see a default three-digit name and symbol for the new waypoint.
2. To accept the waypoint with the default name and symbol, press ENTER/MARK to confi rm the highlighted
‘OK’ prompt.
3. To enter a different name, highlight the name fi eld and press the ENTER/MARK key, then use the DATA
ENTRY keys (see page 7-8) to enter the new letter/numbers and press ENTER/MARK when done. Note:
You may use up to 10 alphanumeric characters for the name.
You may use up to 10 alphanumeric characters for the name.
4. To enter a different symbol, highlight the symbol fi eld to the left of the name and press the ENTER/MARK
key, then use the ARROW KEYPAD to highlight the new symbol and press ENTER/MARK.
5. To enter optional comments or a depth, highlight the desired fi eld and press the ENTER/MARK key, then
use the DATA ENTRY keys (see page 7-8) to enter a value and press ENTER/MARK.
6. To manually enter a set of coordinates, highlight the coordinates and press the ENTER/MARK key, then
use the DATA ENTRY keys (see page 7-8) to enter the new coordinates and press ENTER/MARK when
done.
done.
7. When done, use the ARROW KEYPAD to highlight the ‘OK’ prompt and press ENTER/MARK to save
the waypoint into memory.
Press ENTER/MARK to use the default name and symbol.
Highlight a fi eld and press ENTER/MARK to enter a new
symbol, name, comment or depth.
symbol, name, comment or depth.