Garmin gpsmap 495 Manuale Utente

Getting Started > 

Turning On the GPSMAP 495

The first time you turn on your new GPSMAP 495, the receiver 

must collect satellite data and establish its present location. To 

ensure proper initialization, the GPSMAP 495 is shipped from the 

factory in AutoLocate mode, which allows the receiver to “find 

itself” anywhere in the world. Before you turn on the unit to start 

initialization, be sure that the antenna is rotated up as shown on  

, and it has a clear and unobstructed view of the sky to receive 

satellite signals. 

1.  Press and hold the 

POWER key. When the unit turns on, a tone 

sounds and the Warning Page appears.

2.  Read and be sure you understand the warning. Press 

ENTER to 

continue.

3.  To turn off the GPSMAP 495, press and hold the 

POWER key 

again.

The POWER key controls the 10 level backlight and volume of 

the optional headphone jack or external speaker with vehicle power 

cable.

1.  Press and quickly release the 

POWER key.

2.  Press the 

ROCKER up to increase the brightness or down to 

decrease. Press right to raise the volume or left to lower.

3.  Press 

ENTER or QUIT to close the Backlight/Volume adjustment 

window. Press 

MENU to view the options menu.