Garmin gps 76 Manuale Utente

44

44

  This displays the Map Page with the Map Pointer active.  You can 

now point at any location or point on the map, and enter it into the route. 

When using the Map to create a route, you can select an existing User 
Waypoint/Map Feature, or you can create a ‘New’ Waypoint.  New Waypoints 
are created if you place the Map Pointer on a location that is not a Map 
Feature.  A “New Waypoint” will be stored in the User Waypoint List and can 
be edited as any other User Waypoint.  When placing a “New Waypoint” in a 
route, you will have to press ENTER to create the waypoint, ENTER to save 
the waypoint and ENTER a fi nal time to insert it into the route.

If you place the Map Pointer on a Map Feature, the GPS 76 will only store that 
location in the route using the feature name as a reference. These points are 
not stored in the User Waypoint List. If you would like to save a Map Feature 
Point as a User Waypoint, highlight the point in the route, press ENTER, this 
will display an Information Page. With the Information Page displayed, press 
MENU and select ‘Save as Waypoint’.  

 This will display the Points Menu (see page 38-40 for 

information on the Points Menu).  As a note, if you highlight the dashed line 
in the waypoint fi eld on the Route Page and press ENTER it is the same as 
making this selection. Use the Points Menu to display an Information Page, 
then highlight the ‘OK’ Button and press ENTER.

  You can create a route 

using a combination of the methods described above.  Starting with a blank 
Route Page, either enter a waypoint manually or press the MENU Key and 
select ‘Use Map’.  You can select ‘Use Map’ at any time while creating a route.  
After you have fi nished using the map, press QUIT to display the Route Page 
where you can continue entering waypoints manually.

190-00229-00.indd

07/25/01, 11:22 AM

44