Garmin GPSMAP 60CSx Manuale Utente

g

ettIng

 s

tArted

 > 

u

nIt

 o

vervIew

Some units are equipped with a pre-installed microSD 

card. Other units configured for use in large geographic 

regions (eg. Pacific) require a much larger capacity 

microSD card to store enough map data (not provided).
To install or remove the microSD card:

1.  Remove the Battery Compartment Cover from 

the back of the unit and remove the batteries.

2.  Locate the card tray at the center of the battery 

compartment and check to be certain the card 

is installed in the tray.

3.  To remove the card, slide the tray cover up, 

then lift it toward you to remove the card from 

the tray. 

4.  To re-insert the card, lay the card in the tray, 

close the tray, and replace the batteries and 

cover when finished.

1.  Lift the weather cover from the USB port on 

the upper back of the unit. It recommended 

that you use the USB port rather than the 

Serial Connection port for faster data transfer.

2.  Connect the USB cable provided with the unit 

to the USB port on your PC and to the mini-

USB port on the back of the unit.

3.  Follow instructions for selecting and 

downloading maps provided with the 

MapSource map data disk and Help files.

(under weather 

cover)

Slide the tray cover back to 

OPEN, then lift to remove 

or insert the microSD card.  

Close and slide forward to 

LOCK.

microSD card tray 

is located beneath 

the batteries in the 

battery compartment.

Unlock

Lock

(under weather 

cover)

Slide the tray cover back to 

OPEN, then lift to remove 

or insert the microSD card.  

Close and slide forward to 

LOCK.

microSD card tray 

is located beneath 

the batteries in the 

battery compartment.

Unlock

Lock