Garmin GPSMAP 60CSx Manuale Utente

M

AIn

 P

Ages

 > 

c

oMPAss

 P

Age

Use the options menu to customize the Compass 

Page. With the Compass Page open, press MENU. To 

select an option, highlight it and press ENTER.

The following options are available:

•  Sight ‘N Go—allows you to navigate to an 

object within your sight by pointing the unit at it.

•  Stop or Resume Navigation—turns active 

navigation for a route or a Go To on or off.

•  Recalculate— recalculates the path to a 

destination.

•  Course or Bearing Pointer—toggles between 

the course pointer and the bearing pointer.

•  Data Fields—allows you to select from 2, 3 or 

4 data fields that appear on the Compass Page.

•  Change Data Fields—allows you to select the 

type of data you want to show in the data fields. 

See 

 for definitions of each option.

•  Calibrate Compass—accesses the Compass 

Calibration Page.

•  Restore Defaults—returns to the factory 

settings.

Sight ‘N Go allows you to set a course to a point you 

can see in the distance.

1.  Press 

MENU to open the Compass Page 

Options Menu.

2.  Highlight 

Sight ‘N Go, and press ENTER to 

start the Sight ‘N Go feature. The compass 

ring with pointer is in-line with the two sighting 

marks on the case (the top arrow of the 

ROCKER and tic mark at the top of display 

bezel.)