Garmin geko 101 Manuale Utente

Pagina di 32
19
SYSTEM Page
The System Page allows you to choose from three modes of operation (Normal,  Battery 
Save, DEMO), change the display back light timeout setting, and adjust the display contrast.
GPS Mode
The GPS receiver is always ‘ON’ when it’s in ‘NORMAL’ mode. The normal mode is more 
responsive to sudden turns or change of speed/acceleration. 
When the Geko 101 is in ‘BATTERY SAVE’ mode, the GPS receiver turns on and off 
alternatively to conserve power.
The ‘DEMO’ mode is designed for dealers to show the features and functions of the 
Geko 101 to potential customers inside a closed building where satellite reception is not 
possible. There is no navigation possible in ‘DEMO’ mode. If you select the ‘DEMO’ mode, a 
window displays at the bottom of the screen asking you to verify that you want to turn the 
GPS off (the unit will stop tracking satellites, but not power off).
To change the GPS mode:
1.   From the MENU Page press the UP or DOWN button to highlight the ‘SYSTEM’ fi eld. 
Press the OK button to display the SYSTEM Page. 
2.   Press the UP or DOWN button to highlight ‘GPS MODE’ fi eld and press the OK button. 
3.   Press the UP or DOWN button to highlight your selection and press the OK button. 
4.   Press the PAGE button to return to the SYSTEM page.
Menu Page
The SYSTEM Page allows 
you to change the GPS 
Mode, the Light Timeout 
setting and the contrast 
setting.
A ‘BATTERY LOW’ message dis-
plays at the bottom of every page 
when there are approximately ten 
minutes of battery life left (when 
using alkaline batteries). 
System Page
190-00297-00_0C.indd   19
10/1/2003, 12:59:15 PM