GMC sonoma 2001 Manuale Utente

1. Remove the headlamp assembly as shown under

“One

-

Piece Composite Headlamp System” earlier 

in this section.

2. Twist the bulb socket

counterclockwise to
remove it from the
headlamp assembly.

3. Pull the bulb straight out to remove it from 

the socket.

4. Push the new bulb into the socket until it snaps 

into place.

5. Put the bulb socket into the lamp assembly and twist

it clockwise until it is tight.

6. Put the headlamp assembly back into the vehicle.

Install the two retaining clips.

1. Remove the headlamp assembly as shown under

“Two

-

Piece Composite Headlamp System” earlier 

in this section.

2. Locate the locking tabs

on the assembly.
Squeeze the tabs
together and push that
end of the assembly out
while holding the tabs.
The assembly will 
swing out.

3. Unplug the electrical connector.