Garmin gpsmap 162 Manuale Utente

19

Receiver status is indicated at the top fi eld of the page, with the current Accuracy and Dilution 

Of Precision (DOP) to the right of the sky view.  DOP is an indication of satellite geometry quality 
measured on a scale of one to ten (lowest numbers the best, highest numbers the poorest).  Accuracy 
uses DOP and other factors to calculate horizontal position accuracy in feet or meters.  The status fi eld 
will show one of the following conditions:

•    Looking For Satellites— the receiver is looking for any satellites.

•    AutoLocate— the receiver is looking for any satellite whose almanac has been collected. This 

process can take up to fi ve minutes.

•    Acquiring Satellites— the receiver is looking for and collecting data from satellites visible at its 

last known or initialized position, but has not collected enough data to calculate a fi x.

•    2D Navigation— at least three satellites with good geometry have been acquired and a 2 

dimensional position fi x (latitude and longitude) is being calculated. ‘2D Differential Naviga-
tion’ will appear when you are receiving DGPS corrections in 2D mode and a ‘D’ will show on 
the strength bar of satellites being corrected.

•    3D Navigation— at least four satellites with good geometry have been acquired and your 

position is now being calculated in latitude, longitude and altitude. ‘3D Differential Navigation’ 
will appear when you are receiving DGPS corrections in 3D mode and a ‘D’ will show on the 
strength bar of satellites being corrected.

•    Poor GPS Coverage— the receiver is no longer tracking enough satellites for a 2D or 3D fi x.

•    Receiver Not Usable— the receiver is unusable, possibly due to interference or abnormal 

satellite conditions. Turn the unit off and back on to reset.

•    Simulating Navigation— the receiver is in simulator mode.