Garmin 16-hvs Manuale Utente

The Garmin16-HVS is a complete GPS receiver manufactured by Garmin 
International, Inc.  The Garmin16-HVS has been configured by Campbell 
Scientific, Inc. (CSI) to work with CSI dataloggers. 

The CR1000, CR3000, CR800, and CR850 dataloggers use serial input 
instructions and string handling functions to read, parse and store GPS data.  
The CR10X, CR23X, and other dataloggers that support P15 or the SDM-SIO4 
four channel serial interface can be used with the Garmin16-HVS.  The CR510 
and CR200-series do not support serial data input.  See Appendix A for 
information regarding the CR10X, CR23X, CR5000, CR9000(X) and SDM-
SIO4 applications. 

The Garmin16-HVS includes the GPS receiver and antenna in the same 
housing with one cable for the power supply and communications.  The GPS 
antenna must have a clear view of the sky.  Generally the GPS antenna will not 
work indoors.  

The Garmin16-HVS is a 12-channel GPS receiver that supports FAA Wide 
Area Augmentation System (WAAS) or RTCM differential GPS.  Also 
supported is the 1 Pulse Per Second (PPS) timing signal.  The cable 
connections provided with the Garmin16-HVS do not support differential GPS 
correction.  The cable can be modified by the user if differential correction is 
required. 

Wiring for the Garmin16-HVS can be done with or without the RJ45 
connector.  When shipped from Campbell Scientific, the Garmin16-HVS has 
an RJ45 connector attached to the cable end.  The Garmin16-HVS can be 
purchased with an RJ45 adapter with flying leads, an RJ45 to DB9 RS-232 
adapter, and a magnetic mount.  Table 2-1 is the wiring description for the 
RJ45 adapter with flying leads.  To use Table 2-2, the RJ45 connector must be 
cut off the cable.