Garmin eTrex Vista C Manuale Utente

1. With the Saved Tracks Page for the track or the Track Log 

displayed, highlight the TracBack button and press ENTER to
display the TracBack Page.

2. A map showing the entire track appears and you are prompted 

to select the point you want to TracBack to. Use the ROCKER key 
to move the Panning Arrow to the desired point on the map and 
press ENTER to start navigating the TracBack.

3.  Select either “Follow Road” to route back to the selected point using 

available roadways or “Follow Track” to retrace your original path of 
travel. Highlight the “Don’t ask Again” option and press ENTER if
you want to use the same option the next time you use TracBack.

4. When the TracBack Navigation Page appears, directions to the 

fi rst turn on the track display at the top of the page. Move in 
the direction of the fi rst turn. When you reach the fi rst turn, the 
display will provide direction to the next turn, and so on, until 
you have reached your destination. 

5. To exit a TracBack, press the MENU key and select “Stop Navigation.”

1. With a saved track displayed on the map, use the ROCKER key 

to move the Panning Arrow to the point on the track that you 
want to mark as a user waypoint. Press ENTER to display the 
Mark Waypoint Page.

2. Customize the user waypoint if desired as explained on page 27, 

then highlight the “OK” button and press ENTER to save. 

TracBack Page

Active Tracback Following the Track

TracBack 

Route

Options

eTrex Vista C Owner's Manual Text.indd   48

8/12/2004, 9:17:17 AM