Garmin 5008 Manuale Utente

Viewing Information

To view fuel gauges from the Home screen, select 

 > 

 

 > 

. Fuel 

flow for each engine, total fuel flow, fuel level in each tank, total fuel remaining, fuel economy, 

engine trim, boat speed, engine RPM, and the range for your boat are displayed.

  NOtE: To view fuel information, your unit must be connected to an external fuel sensor, such as the 

Garmin GFS

™

 10.

From the Home screen, select 

 > 

 

 > 

 > 

.

Fill Up All Tanks—select when your tank is full. An estimate of the total fuel is shown. Adjust 

if necessary.
Add Fuel To Boat—select when you have added less than a full tank. An estimate of the fuel 

added is shown. Adjust if necessary.
Set Total Fuel Onboard—select to specify the total fuel in your tanks.
Fuel Economy—select either 

 or 

 (using data from a speed wheel) 

for the fuel economy calculation.

Your unit can display video if you connect it to a video source using the supplied video cable. See 

the GPSMAP 4000/5000 Series Installation Instructions for details.
To view video from the Home screen, select 

 > 

.

Select 

 to set up the following:

Source—selects the video device (1 or 2) to use to display video. If you have two video sources 

and want to alternate between the two, select 

 to define the amount of time each video 

is displayed.
Aspect—switches between the standard aspect ratio and a stretched aspect ratio. The video 

cannot be stretched beyond the dimensions provided by the connected video device. Because of 

this, the stretched video may not fill the entire screen of the GPSMAP 4012/5012.
Brightness—adjusts the brightness of the video feed up or down, or select 

 to allow the unit 

to automatically adjust the brightness.
Saturation—adjusts the color saturation up or down, or select 

 to allow the unit to 

automatically adjust the saturation.
Contrast—adjusts the contrast up or down, or select 

 to allow the unit to automatically 

adjust the contrast.
Standard—selects the video format used by the source (PAL or NTSC). Select 

 to let the 

unit automatically select the source format.

  WARNING: Do not attempt to operate or watch video input while operating or navigating your boat. 

Operating or watching the video input while the boat is moving could cause an accident or collision 

resulting in property damage, serious injury, or death.