Garmin etrex camo Manuale Utente

34

Display Page

The Display Page allows you to set the display backlight timeout (on all the time, 15 or 30 

seconds, and 1 or 2 minutes) and the display contrast.

1.  Press the PAGE button and switch to the MENU Page. Press the UP or DOWN button to 

highlight ‘SETUP.’ Press 

ENTER. The SETUP Page appears.

2.  Press the 

UP or DOWN button to highlight ‘DISPLAY,’ then press ENTER. Press ENTER on 

the ‘LIGHT TIMEOUT’ field. 

3.  Press the 

UP or DOWN button to highlight your selection, then press ENTER. Press PAGE 

to get back to the ‘SETUP’ page.

1.  Press the PAGE button to switch to the ‘MENU’ Page. Press the UP or DOWN button to 

highlight ‘SETUP,’ then press 

ENTER. The ‘SETUP’ Page appears.

2.  Press the 

UP or DOWN button to highlight ‘DISPLAY,’ then press ENTER. Press the UP or 

DOWN button to highlight the ‘CONTRAST’ icon, then press ENTER.

3.  Press the 

UP or DOWN button to adjust the contrast, then press ENTER. Press PAGE to 

get back to the ‘SETUP’ page.

Units Page

Using your eTrex with a paper map increases the navigation power of both. If you are 

going to use a map in conjunction with the eTrex, you must select the position format (grid), 
map datum, map units, and north reference to match the map’s units. This is the purpose 
of the Units Page. Regarding position format, the eTrex allows you to choose from more 
than eighteen different grids. The eTrex supports the UTM/UPS and latitude/longitude grids 
because together they cover the world.