ONKYO ht-r520 Manuale Utente
46
Advanced Setup
To get the best from surround sound, it’s important that
the sound from each speaker reaches the listener at the
same time. To achieve this, you need to specify the dis-
tance from each speaker to the listening position.
the sound from each speaker reaches the listener at the
same time. To achieve this, you need to specify the dis-
tance from each speaker to the listening position.
Notes:
• The Center and Subwoofer distances can be set up to
5 ft. (1.5 m) more or less than the Front distance. For
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between 15
and 25 ft. (4.5 and 7.5 m).
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between 15
and 25 ft. (4.5 and 7.5 m).
• The SurrRight, Surr Left, and Surr Back distances can
be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less
than the Front distance. For example, if the Front dis-
tance is set to 20 ft. (6 m), the SurrRight, Surr Left,
and Surr Back distances can be set between 5 and 25
ft. (1.5 and 7.5 m).
than the Front distance. For example, if the Front dis-
tance is set to 20 ft. (6 m), the SurrRight, Surr Left,
and Surr Back distances can be set between 5 and 25
ft. (1.5 and 7.5 m).
Advanced setup cannot be set while headphones are connected,
Speaker B is on, or the multi channel input is being used.
Speaker B is on, or the multi channel input is being used.
Speaker Distance
1
Measure and make a note of the
distance from each speaker to
the listening position.
distance from each speaker to
the listening position.
2
Press the [AMP] button followed
by the [SETUP] button on the
remote controller.
by the [SETUP] button on the
remote controller.
3
Use the Up and Down [
]/[
]
buttons to select “2. SP Dis-
tance,” and then press the
[ENTER] button.
tance,” and then press the
[ENTER] button.
CD
+10
0
CLEAR
1
2
3
4
5
6
7
8
9
V1
V2
V3
DVD
MULTI CH
--/---
TAPE
TUNER
INPUT
I
+
-
ENTER
SET
UP
GUI
DE
RE
TURN
EXIT
CINE FLTR
LEVEL
-
LEVEL
+
CH SEL
TEST TONE
DSP
DIRECT
STEREO
ALL ST
SURR
L NIGHT
TO
P M
ENU
MEN
U
VOL
+
-
CDR
SAT
AMP
+
_
TV
VCR
CABLE
DVD
CD
MD
DISC
CH
TONE
TUNER/
TAPE
TAPE
DISPLAY
TV
INPUT
INPUT
PREV
CH
CH
DIMMER
SLEEP
RANDOM
SP A
SP B
MUTING
ANGLE
SEARCH
SUBTITLE
AUDIO
MEMORY
A-B
REPEAT
ON
STANDBY
T V
TV CH
T V VOL
RC-570M
REC
LAST M
REMOTE MODE
OPEN/CLOSE
DSP
VIDEO OFF
OR-EQ
LEVEL
-
LEVEL
+
SETUP
AMP
ENTER
DISPLAY
AMP
ENTER
ENTER
4
Use the [DISPLAY] button to
switch
switch
ft
or
m
.
ft:
distances in feet. Can be set from
1 to 30 feet in 1-foot steps.
1 to 30 feet in 1-foot steps.
m:
distances in meters. Can be set
from 0.3 to 9 meters in 0.3-meter
steps.
from 0.3 to 9 meters in 0.3-meter
steps.
5
Use the Left and Right [
]/[
]
buttons to specify the distance
for “Front,” then press the Down
[
for “Front,” then press the Down
[
] button to select the next
speaker.
6
Repeat step 5 for all speakers.
Note:
Speakers that you set to No or None in
the Speaker Configuration (page 48)
cannot be selected.
the Speaker Configuration (page 48)
cannot be selected.
7
Press the [SETUP] button.
Setup closes.
DISPLAY
ENTER
HT-R520_En.book Page 46 Monday, March 15, 2004 2:47 PM