Hitachi VM-H100LA Manuale Utente
Advanced Techniques
- 39 -
4. Use the STOP ( )button to place the cursor where you wish to begin your title.
5. Use the F.FWD (
) and REW (
)buttons to select the first character of your title.
6. Once you've selected a character press the STOP( ) button to set it.
7. Complete the title by repeating steps 5 and 6.
8. When you complete your title, press PLAY ( ) to create a second title as required, or press the TITLE ON/OFF
button on the remote control to store the title in memory and remove the title graphics from the LCD monitor.
button on the remote control to store the title in memory and remove the title graphics from the LCD monitor.
Note: As long as the correct current time can be displayed, the title is held in memory.
Correcting Errors
1. Press the TITLE ON/OFF button on the remote control.
2. Use the STOP( ) button to select the character to be corrected.
2. Use the STOP( ) button to select the character to be corrected.
3. Use the F.FWD (
) and REW (
) buttons to correct the character.
4. Press the TITLE ON/OFF button on the remote control to store the corrected title in memory.
Recording a Title on a Tape in the Camcorder
1. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to CAM.
2. Locate the point of the tape where you wish to record the title ("Using Quick Edit", p.45).
3. Press the TITLE ON/OFF button to start recording the title.
4. Press the Start/Stop button to start recording the title.
5. Press the TITLE ON/OFF button on the remote control to stop recording the title. The title graphics disappear
from the LCD monitor and the camcorder can record normally.
2. Locate the point of the tape where you wish to record the title ("Using Quick Edit", p.45).
3. Press the TITLE ON/OFF button to start recording the title.
4. Press the Start/Stop button to start recording the title.
5. Press the TITLE ON/OFF button on the remote control to stop recording the title. The title graphics disappear
from the LCD monitor and the camcorder can record normally.
Note: Create and record your titles before an event you plan to record. Just press the TITLE ON/OFF button
on the remote control to superimpose the title over the scene as you record it. This method avoids erasing
previously recorded material which will happen when you record a title on a previously recorded tape.
Note: Title recording is disabled when you connect the optional AV input cord to the AV IN/OUT jack to record
video and audio from the television or VCR.
Note: If you specify TITLE (Automatic Title and Date Recording) for the DATE MODE item, you can record
the created title automatically for 10 seconds once a day at the beginning of recording for 10 seconds. See
"Date Recording" on page 36 for details.
on the remote control to superimpose the title over the scene as you record it. This method avoids erasing
previously recorded material which will happen when you record a title on a previously recorded tape.
Note: Title recording is disabled when you connect the optional AV input cord to the AV IN/OUT jack to record
video and audio from the television or VCR.
Note: If you specify TITLE (Automatic Title and Date Recording) for the DATE MODE item, you can record
the created title automatically for 10 seconds once a day at the beginning of recording for 10 seconds. See
"Date Recording" on page 36 for details.
Recording a Title while Transferring a Tape