Garmin powerlite 85+ Manuale Utente

Before using the projector, make sure you read the safety instructions in the 
User’s Guide on your projector CD.

Choose from the following connections:

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projector’s Computer1 or Computer2 port, and the 
other end to your computer’s

monitor port. If you are using a notebook, 

switch it to external display. You can also connect an audio cable to the 
Audio1 or Audio2 port. 

Connect a computer (Windows

®

 2000 SP4 or later or Mac OS

®

 X 10.5.1-10.6) 

using the USB cable that came with the projector.

Connect the square end of the USB cable to the projector’s

TypeB 

(square) USB port. Connect the flat end of the cable to any USB port on your 
computer. Then turn on your projector (see “Turn on your equipment”). You 
can also connect an audio cable to the Audio2 port.

 

Follow the on-screen instructions to install the Epson USB Display software 
(with Mac OS X, first double-click the USB Display Installer icon that appears 
on your computer screen). Then press the USB button on the remote control. 
(You need to install the software only the first time you connect.)

Connect the projector to your network using an Ethernet

®

 cable. See “Project 

Over the Network” on the back of this sheet for more information.

Connect a dynamic or condenser microphone to the Mic port, using a 3.5 mm 
mini-jack cable.

NOTE: If you’re using a condenser microphone, set the Plug-in Power setting 
to On. See the User’s Guide on your projector CD for more information.

Connect up to 4 video devices and use the remote control to switch between 
them.

RCA video cable 

(composite video)

(optional)

S-Video 

cable

(optional)

Component-to-

VGA cable

(optional)

Audio cable 

(optional)

Connect a digital camera, document camera (Epson DC-06 document camera), 
or other USB device to the projector’s

TypeA (flat) USB port.

If you connect a digital camera or USB storage device, you can use the 
projector’s Slideshow feature to present JPEG images. See the User’s Guide on 
your projector CD.

For information on playing sound through the projector or connecting an 
external monitor, see the User’s Guide on your projector CD.

 

Turn on your computer or video source.

 

Plug in the projector.

Open the A/V Mute slide all the way.

 Press 

the

power button on the projector or remote control.

Power light

Power button

 The

power light flashes green, then stays on.

NOTE: To shut down the projector, press the

 

If you don’t see an image, press the Source Search button on the 
projector or remote control to select the image source.

NOTE: If you still see a blank screen or have other display problems, see 
the troubleshooting tips on the back of this sheet.

 

To raise the image, press the foot release button and lift the front of the 
projector. Release the button to lock the foot in position. 

 

Turn the focus ring to sharpen the image.

 

Turn the zoom ring to reduce or enlarge the image.

Zoom

Focus

 

If your image looks like

or

, you’ve placed the projector off to 

one side of the screen at an angle. Place it directly in front of the center 
of the screen, facing the screen squarely. 

 

If your image looks like

or

, press the

or

buttons on the 

projector to correct it.

Make sure the batteries are installed as shown (two AA batteries).

Change

presentation

slides (USB cable
connection only)

Navigate 

projector 

menus

Choose which 
source to display

Control projector volume

Turn projector

on and off

Turn off projector

display and sound

Open a menu item 
assigned by the user

You can use the remote control to operate the projector. With the USB cable, 
you can use the remote as a wireless mouse. For more information on using 
the remote control, see the User’s Guide on your projector CD.