Greenheck Fan ms4309f Manuale Utente

Pagina di 2
SPECIFICATION DATA
63-1292—6
MS4209F, MS4309F, MS4709F, 
MS4809F, MS8209F, MS8309F 
Fast-Acting, Two-Position Actuators
FOR FIRE/SMOKE CONTROL APPLICATIONS
N314
The MS4209F, MS4309F, MS4709F, MS4809F, MS8209F, 
MS8309F Fast-Acting, Two-Position Actuators are spring 
return direct coupled actuators (DCA) with an integral junction 
box for on/off damper control. The actuator accepts an on/off 
signal from a single-pole, single-throw (spst) controller. 
Models are available with clockwise (cw) or counterclockwise 
(ccw) spring return and are designed to operate reliably in 
smoke control systems requiring Underwriter’s Laboratories 
Inc. UL555S ratings up to 350°F.
FEATURES
• 80 lb-in. (9 N•m) minimum driving torque 
at 350°F (176°C).
• Integral spring return ensures level of return torque.
• Stainless steel internal spring.
• Fifteen-second spring return timing.
• No special cycling required during long-term holding.
• No audible noise during holding.
• Patent pending design eliminates need for limit 
switches to reduce power consumption.
• Models available for 24, 120, and 230 Vac.
• Ninety-five degree angle of rotation.
• Actuator holds rated torque at reduced power level.
• Die-cast aluminum housing.
• Housing design allows flush mounting to damper.
• Integral junction box with three conduit openings 
eliminates need for separate wiring box.
SPECIFICATIONS
Models:
Electrical Ratings:
!
Power Input:
!
MS4209, MS4309: 120 Vac +10%, -15%, 60 Hz.
!
MS4709, MS4809: 230 Vac ±10%, 50/60 Hz.
!
MS8209, MS8309: 24 Vac +20%, -10%, 50/60 Hz.
!
Power Consumption (at Rated Voltage):
!
MS4209, MS4309: Holding: 0.13A, 7W.
Running (at 80 lb-in.): 0.25A, 23W.
!
MS4709, MS4809: Holding: 0.09A, 7W.
Running (at 80 lb-in.): 0.13A, 23W.
!
MS8209, MS8309: Holding: 7 VA.
Running (at 80 lb-in.): 23 VA.
Electrical Connections:
!
MS4209, MS4309, MS8209, MS8309: Two color coded 
16 in. leads.
!
MS4709, MS4809: 1m appliance cable.
!
Ground screw.
!
Three 7/8 in. conduit connection holes (fittings not 
included).
Controller Type:
!
MS4209, MS4309: Line voltage (120 Vac), two-position, 
spst (Series 40).
!
MS4709, MS4809: Line voltage (230 Vac), two-position, 
spst (Series 40).
!
MS8209, MS8309: Low voltage (24 Vac), two-position, spst 
(Series 80).
Device Weight:
!
5 lb (2.3 kg).
Temperature Ratings:
!
Ambient: 0°F to 130°F (-18°C to 55°C).
!
Shipping and Storage: -40°F to 140°F (-40°C to 60°C).
Model
Spring Return 
Direction
Voltage 
in Vac
Torque 
in lb-in. (N•m)
MS4209F
cw
120
80 (9)
MS4309F
ccw
MS4709F
cw
230
MS4809F
ccw
MS8209F
cw
24
MS8309F
ccw
Humidity Rating:
!
5% to 95% RH noncondensing.
IMPORTANT
• The actuator is designed to meet UL555S standards 
at 350°F (176°C). The actuator must be tested with 
the damper to achieve this rating.
• Honeywell does not recommend using linkages with 
these actuators because side-loading of the output 
hub reduces actuator life.
Stroke:
!
95° ± 3°, mechanically limited.
Torque Rating (at Rated Voltage):
!
Typical Holding (0°F to 350°F): 80 lb-in. (9 N•m).
!
Typical Driving (0°F to 350°F): 80 lb-in. (9 N•m).
!
Spring Return: 80 lb-in. (9 N•m).
!
Stall Maximum: 240 lb-in. (27 N•m).
Noise Ratings (Maximum):
!
Driving Open: 80 dBA at 1m.
!
Holding: 20 dBA at 1m (no audible noise).
Timing (at Rated Torque and Voltage):
!
Drive Open:
!
Ambient Conditions: 25 sec maximum, 14 sec typical.
!
At 350°F: 75 sec maximum.
!
Spring Close: 20 sec maximum.
Design Life (at Rated Voltage):
!
60,000 full stroke cycles.
Minimum Damper Shaft Length:
!
1-1/2 in. (38 mm).