Garmin gps 17 Manuale Utente

I

NSTALLATION

 I

NSTRUCTIONS

 

After all the wiring is complete, plug the 18-pin harness into the center connector on the backside of the GPSMAP 2106/2110. The 5-pin port 

on the right side is intended for future interfacing features and does not require connection at this time. 
With power applied to the circuit, test the installation by pressing the 

POWER key on the front of the unit. See the GPSMAP 2106/2110 

Owner's Manual for steps on initializing the receiver.

18-pin connector

5-pin CANet connector