Garmin gps 17 Manuale Utente

I

NSTALLATION

 I

NSTRUCTIONS

Bail mount

Mounting knobs

•  Drill and drill bit
•  Screwdriver
•  Pencil
•  Mounting hardware (not included)

  NOTE: Mounting hardware (fasteners) not included. Mounting holes are 5/16"  

(7.9 mm) in diameter.

1.  Using the bail mount as a template, mark the location of the four mounting holes. 

Be sure to leave at least two inches of clearance behind the unit for the wiring.

2.  Using an appropriate size drill bit, drill pilot holes for the fasteners.
3.  Secure the bail mount to the surface with the fasteners.
4.  Loosen the mounting knobs.
5.  Slide the unit into the bail mount, and tighten the mounting knobs.