Olympus fe-120 x-700 Manuale Utente
14
En
1
Press
bY.
•
The self-timer settings screen is displayed.
2
Select [ON], and press Z.
3
Press the shutter button fully to take the
picture.
picture.
•
The self-timer lamp lights for approximately 10
seconds after the shutter button is pressed, then starts blinking. After
blinking for approximately 2 seconds, the picture is taken.
seconds after the shutter button is pressed, then starts blinking. After
blinking for approximately 2 seconds, the picture is taken.
1
Press
d#.
•
The flash mode setting screen is displayed.
2
Press
a/c to select the flash mode, and press Z.
3
Press the shutter button halfway.
•
When the flash is set to fire, the
#
mark lights steadily.
4
Press the shutter button fully to take the picture.
Flash working range:
W (max.) : Approx. 0.2 m to 3.7 m (0.7 ft. to 12.1 ft.)
T (max.) : Approx. 0.6 m to 2.1 m (2.0 ft. to 6.9 ft.)
W (max.) : Approx. 0.2 m to 3.7 m (0.7 ft. to 12.1 ft.)
T (max.) : Approx. 0.6 m to 2.1 m (2.0 ft. to 6.9 ft.)
Self timer
Flash modes
Icon
Flash mode
Description
No
indication
Auto flash
The flash fires automatically in low light
or backlight conditions.
or backlight conditions.
!
Red-eye-reduction
flash
flash
The red-eye reduction flash mode
significantly reduces this phenomenon by
emitting pre-flashes before firing the
regular flash.
significantly reduces this phenomenon by
emitting pre-flashes before firing the
regular flash.
#
Fill-in flash
The flash fires regardless of the available
light.
light.
$
Flash off
The flash does not fire even in low light
conditions.
conditions.
Self-timer lamp
d4271_basic_e.fm Page 14 Monday, July 4, 2005 10:33 PM