Oricom eco5100 series Manuale Utente

Pagina di 44
APPENDIX
37
Problem
Possible cause(s) 
Solution(s)
Phone does 
not ring 
when a 
call comes in.
1. The ringer is off.
2. Too many phones are sharing the same 
phone line.
3. Base unit not plugged in.
1. Turn ON the ringer.
2. Disconnect some of the phones from the phone line.
3. Check base unit CONNECTIONS.
Keypad does 
not work.
Keypad may be locked.
UNLOCK the keypad.
Busy tone +
in use light on.
1. Other handset may still be connected.
2. Check power supply connection.
1. Check ALL handsets and END all calls.
2. Check CONNECTIONS to wall and base.
Can’t transfer a 
call. 
1. Handset is busy.
2. Handset is out of range.
3. Wrong handset number.
1. Check ALL handsets and END all calls.
2. Move handset CLOSER to base unit.
3. Check HANDSET NUMBER.
Answering 
machine won’t 
record.
1. Message limit exceeded.
2. Machine not switched on.
3. OGM2 selected.
1. DELETE old messages.
2. SWITCH-ON the answering machine.
3. Can only record with OGM1, CHANGE to OGM1.
Remote 
operation
doesn’t work.
1. Incorrect security PIN.
2. Some cordless and mobile handsets do 
not generate continuous tones.
3. Pausing too long between key press.
1. CHECK security PIN.
2. Need to use a TONE-DIALLING phone.
3. Key in the digits within the 10 seconds limit.
Note:
  If none of the above solutions help, reset your phone by disconnecting the mains 
power from the base and removing batteries from handset/s. Reconnect after 15 
minutes.
  Alternatively please contact Customer Service on 1300 889 785.