Garmin stylus 3880 Manuale Utente
Setting Up Your System for Network Printing
17
Configuring the Network Interface
After connecting the printer to the network, you need to configure the network
interface for use on a TCP/IP network. The following items are used to make
network settings on the printer’s control panel (available only when
NEWORK SETUP
interface for use on a TCP/IP network. The following items are used to make
network settings on the printer’s control panel (available only when
NEWORK SETUP
is set to ENABLE):
Follow these steps to set the IP address, subnet mask, and default gateway
from the control panel:
from the control panel:
1. Make sure that the printer is turned on, and the LCD displays READY.
2. Press the Menu r button on the printer to enter the printer’s menu system.
3. Press d to highlight NETWORK SETUP, then press r.
4. Press r, then d to highlight ENABLE.
5. Press .
An
asterisk ( ) appears next to ENABLE to show that it’s selected.
6. Press l to go back, then press d to highlight IP ADDRESS SETTING.
Item
Parameter
NETWORK SETUP
DISABLE, ENABLE
IP ADDRESS SETTING
AUTO, PANEL, PING
IP,SM,DG SETTING
IP ADDRESS
000.000.000.000 to 255.255.255.255
(default setting is 192.168.192.168)
000.000.000.000 to 255.255.255.255
(default setting is 192.168.192.168)
SUBNET MASK
000.000.000.000 to 255.255.255.255
(default setting is 255.255.255.000)
000.000.000.000 to 255.255.255.255
(default setting is 255.255.255.000)
DEFAULT GATEWAY
000.000.000.000 to 255.255.255.255
(default setting is 255.255.255.255)
000.000.000.000 to 255.255.255.255
(default setting is 255.255.255.255)
APPLE TALK
ON, OFF
MS NETWORK
ON, OFF
BONJOUR
ON, OFF
INIT NETWORK SETTING
EXECUTE
*