Garmin stylus 3880 Manuale Utente
34
Troubleshooting
Chapter 4
Troubleshooting
General Problems
Cannot configure the network interface or cannot print from the network.
Cannot print even if you have assigned the IP address to the computer and
the printer.
the printer.
Unable to start EpsonNet Config.
The message “EpsonNet Config cannot be used because no network is
installed.” appears when you start EpsonNet Config.
installed.” appears when you start EpsonNet Config.
Cause
What to do
The printer settings or network
settings may be wrong.
settings may be wrong.
First, check to see if you can print a status sheet,
as described in “Printing a Network Status Sheet”
on page 19. If you can print a status sheet,
check the network settings.
as described in “Printing a Network Status Sheet”
on page 19. If you can print a status sheet,
check the network settings.
Cause
What to do
You have assigned an IP
address to the computer
manually, but you assigned
the IP address to the printer by
Automatic Private IP
Addressing (APIPA).
address to the computer
manually, but you assigned
the IP address to the printer by
Automatic Private IP
Addressing (APIPA).
Use EpsonNet Config or the printer’s control
panel to assign the printer an IP address that
belongs to the same segment as the computer.
panel to assign the printer an IP address that
belongs to the same segment as the computer.
Cause
What to do
You have added or deleted
protocols after installing
EpsonNet Config.
protocols after installing
EpsonNet Config.
Uninstall EpsonNet Config and then reinstall it.
See “Uninstalling Software” on page 36.
See “Uninstalling Software” on page 36.
Cause
What to do
TCP/IP is not installed on the
computer.
computer.
Install the TCP/IP protocol.
TCP/IP is installed on the
computer, but its IP address is
not set correctly.
computer, but its IP address is
not set correctly.
Set a correct IP address for the computer.