Garmin eTrex Vista Manuale Utente

Pagina di 84
16
The  Navigation Page provides active guidance with a rotating compass ring that 
shows your  course over ground (track) while you’re moving and a bearing pointer to 
indicate the current direction to your destination (bearing) relative to the course over 
ground. 
The  Compass Ring works as an  Electronic Compass (which can be turned On or 
Off) functions as a magnetic compass when you are stationary. Or, when the Compass is 
in the On mode and you are moving, the heading is controlled by the GPS receiver. The 
Compass switches to the GPS receiver when your rate of travel reaches a pre-set speed, 
and comes back on when you have stopped moving after a pre-set period of time. Use 
the  Heading Setup Page to change the pre-set time.
The Status Window at the top of the page shows you the name of your destination, 
the distance, and the time to go. Two Data  Fields are provided, and can be programmed 
to display a variety of navigation data.
The Bent (Bearing) Pointer arrow alerts you to the upcoming turn while you are 
navigating a route. When you get within 15 seconds ETA of the current point, the 
pointer “bends” to indicate the direction of the turn to the next point while still showing 
the direction to the current point.
When you are not on an active Goto, Track or Route (in other words: not traveling 
to a recorded destination), the window at the top of the page displays the status of the 
GPS Receiver and the approximate accuracy of your current position. The Compass Ring 
displays your heading while you are moving, but the data fi elds at the bottom of the 
page will not display any destination related data, such as Estimated Time of Arrival.
Time to Destination
Straight Line Distance
to the Destination
Selectable Data Fields
Bearing Pointer
Compass Ring
Destination (Waypoint) Name
 Navigation
The Main Page
190-00219-00_0C.indd   169/20/2002, 9:54:22 AM