Garmin eTrex Vista Manuale Utente

24

The ‘View Points’ option allows you to scroll through 

the stored elevation profi le and to view a single point 
along the profi le. When the pointer is stopped at a loca-
tion along the profi le, the display shows the elevation, 
time of day and date the point was created. 

1.   Use the CLICK STICK to access the Options Menu.

2.   Highlight the ‘View Points’ option and press in on 

the CLICK STICK to display the View Points Page.

3.   Move the CLICK STICK Right or Left to scroll the 

profi le past the pointer in the center of the page. 

     As the profi le moves past the pointer, the status 

window at the top of page changes to display the 
date, time, and altitude for the point beneath the 
pointer.

You can reset the elevation data and the maximum 

elevation data by selecting the ‘Reset’ option from the 
Altimeter Page Options Menu. 

1.   Use the CLICK STICK to highlight the ‘Reset’ 

option from the page Options Menu and press in on 
the CLICK STICK to display the ‘Reset’ page.

2.   Use the CLICK STICK to highlight the reset options 

on the page and then press in on the CLICK STICK 
to place a check mark in the box next to a selected 
item. 

3.   Move to the ‘Apply’ button and press in on the 

CLICK STICK to reset the data  fi elds.

Because the eTrex Vista relies on the Barometric pres-

sure to determine the elevation and the pressure at any 
given elevation can fl uctuate, you can calibrate the altim-
eter to increase its accuracy. You must know the elevation 

190-00219-00_0C.indd   24

9/20/2002, 9:54:27 AM