Hitachi cmp307xe Manuale Utente
14
ENGLISH
● While the on-screen display system, EasyMenu ( ) is not on display, press the remote controller
VOLUME button
or
(or the unit VOLUME button ▲ or ▼ to adjust the sound volume.
■ The adjustment status will be displayed as guidance while you press these buttons.
• While the guidance is on display, press
or
▲
to turn up the
volume.
• While the guidance is on display, press
or
▼
to turn down
the volume.
■ You can also adjust the sound volume setting via the on-screen
display system, EasyMenu .
■ The sound volume adjustment mode will exit when no keys are
entered for 5 seconds. (The adjustment status guidance will
disappear automatically.)
disappear automatically.)
VOLUME
: 30
VOLUME
Set unit
Remote
controller
[VOLUME]
● Press the RGB/VIDEO button on the remote controller or the unit to switch the input in the sequence
of RGB1 ➝ RGB2 ➝ RGB1.
■ The kinds of input for which SKIP has been selected with the on-screen
display system, EasyMenu ( ), are skipped.
RGB1
(D-sub input)
RGB2
(BNC input)
RGB/
VIDEO
VIDEO
Remote
controller
Set unit
RGB/VIDEO
16
18
Sound volume setting
Adjustment status guidance
When the indicating lamp blinks in green or the message “POWER SAVE” or “OUT OF FRQENCY”
appears on the screen, there is something unusual about the status of reception. See “Symptoms That
Seemingly Appear to be Failures.”
appears on the screen, there is something unusual about the status of reception. See “Symptoms That
Seemingly Appear to be Failures.”
OPERATING INSTRUCTIONS
● To turn on the set power supply, set the MAIN POWER switch (
) of the main unit to ON and then
press the SUB POWER button (
) or the POWER button of
the remote control.
● To turn off the set power supply, press the SUB POWER button (
) of the main unit or the POWER
button of the remote control, then set the MAIN POWER switch (
) to OFF.
■ For normal operations, leave the main power switch (
) set to ON and use the sub power
button or the Power button of the remote control to turn the power on and off.
■ The indicating lamp lights when the power is turned on.
POWER
Main power
switch
switch
Set unit
Remote
controller
controller
23
Display lamp
Power status
Lights red
Off
Lights or blinks green
On
19
Turning Power On and Off
TIPS
■ Avoid repeatedly turning the monitor on and off at short time intervals.
• Failures might result from such operation.
■ Turn off the main power switch (
) before leaving the monitor out of use for
an extended period of time.
■
If a power failure occurs while the set is running, it would be powered on upon recovery
from the failure. Turn off the unit main power switch before leaving the set.
from the failure. Turn off the unit main power switch before leaving the set.
Input Selection
Volume Adjustment