Q-See QT428 Manuale Utente
Connect the Devices
STEP 1
Turning on the DVR
1. Connect the power cable to the DVR
2. Connect the power adapter to the power cable.
3a. Plug the power cable into a surge protector
b. QT428 and QT446 DVRs - Turn on the DVR using the power switch on the
rear panel.
You will hear a beep as the DVR powers up.
STEP 3
Connect Mouse
Plug the mouse into the port labled “USB” on the rear
of the DVR.
of the DVR.
NOTE: the USB port on the front of the DVR is used for
backing up video files.
backing up video files.
STEP 2
Connect to a VGA Monitor or Television
3a
3b
3a
3b
OPTION A:
Connecting a VGA PC Monitor
1. Plug the VGA cable into the port marked “VGA” on the back of the DVR.
2. Plug the other end of the VGA cable into the similar port on the back of
the monitor.
3. Plug the monitor’s power cable into the surge protector.
OPTION B:
Connecting a Television
1. Connect the BNC-to-RCA cable to the “Video Out” port on the back of
the DVR.
2. Plug the RCA end into the “Video In” port on the television.
3. Plug the television’s power cable into a surge protector.
4. Press and hold the ESCAPE button on the front of the DVR for 10
3. Plug the television’s power cable into a surge protector.
4. Press and hold the ESCAPE button on the front of the DVR for 10
seconds or until you hear a beep to indicate that the video mode has
been changed.
been changed.
Initial Set Up
1. Right-click the mouse anywhere on the screen to bring up the
Control Bar at the bottom of the screen.
2. Click on the Menu icon.
STEP 4
Open Control Bar
STEP 5
Log In
STEP 6
Set Date and Time
1. You will be asked to log in before proceeding.
User Name: admin
Password: 123456
Password: 123456
B. Input the required text
and hit the ENTER key.
A. To enter numbers or
characters, click the
appropriate field and
a virtual keyboard will
appear. Symbols can be
accessed through the
use of the SHIFT key.
appropriate field and
a virtual keyboard will
appear. Symbols can be
accessed through the
use of the SHIFT key.
Refer to the
User’s Guide if you wish to change this password at a
later time.
After logging in, the
Main Menu will open.
1. Click on the Setup icon to open the Setup Menu.
2. Click on the Basic icon.
3. Select the Date & Time
tab. Click in the ap-
propriate field and use
the virtual keyboard to
enter the date, time, and
formats you wish to use.
propriate field and use
the virtual keyboard to
enter the date, time, and
formats you wish to use.
To save your settings, click
on APPLY and the EXIT.
on APPLY and the EXIT.
NOTE: If you wish to change your language at this time, you can do
so in the
so in the
System tab. You will have to re-log in afterwards.
System
System
DST
DST
Date & Time
Date & Time
BASIC
BASIC
Default
Default
Apply
Apply
Exit
Exit
Update Now
Update Now
Save Now
Save Now
Date Format
Time Format
Time Zone
Sync Time with NTP Server
NTP Server
System Date
System Time
25
MAY
MM-DD-YY
24 Hour
GMT
time.windows.com
03/04/2011
12 : 43 : 13
MM-DD-YY
24 Hour
GMT
time.windows.com
03/04/2011
12 : 43 : 13
Date Format
Time Format
Time Zone
Sync Time with NTP Server
NTP Server
System Date
System Time
IMPORTANT! You must follow these steps to enter the current date and time in order to effectively use the video search function described at the end of this guide.
Video Loss