Lenoxx pr35m Manuale Utente

IB-PR35M(CR)-WM-E-031903

RADIO OPERATION

AM broadcast band:

1. Slide the BAND switch to AM position.

2. Rotate the VOLUME control clockwise past click, the set will turn on. To turn

the set off, rotate the VOLUME control counter-clockwise until past click.

3. Tune the set to the desired station by rotating the TUNING control.

4. Best reception can be received by carefully tuning the set and rotating the set

slightly.

BATTERY INSTALLATION

3 SIZE AA ALKALINE

BATTERIES

BACK OF SET

SLIDE OUT TO OPEN

FM broadcast band:

1. Slide the BAND switch to FM position.

2. Follow above points 2 and 3.

3. Your set is equipped with a TELESCOPING FM ANTENNA. For best results,

fully extend the TELESCOPING FM ANTENNA.

BATTERY INSTALLATION

1. Hold the two sides of the BATTERY DOOR and slide it out.

2. Insert 3 size AA alkaline batteries.

3. We recommend alkaline batteries for longer life.

4. Close the BATTERY DOOR.

Do not mix old and new batteries.

Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Nickel-

Cadmium) batteries.

REPLACEMENT OF BATTERIES MUST BE DONE BY ADULT

BATTERY REPLACEMENT

Exhausted batteries may leak and damage the set, or cause weak or distorted

reception. Replace batteries when required. When the set is not to be used for an

extended period, remove the batteries from the radio.

ANTENNAS

Your new radio is equipped with a built-in ferrite rod antenna for use on the AM BAND,

plus a TELESCOPING ANTENNA for FM reception. Since all transistor radios are

slightly directional, it is desirable to rotate the radio to obtain the best reception.