ICOM IC-706MKIIG Manuale Utente
55
7
SET MODE
33 S-LVL SPCH
((S
S--lle
ev
ve
ell s
sp
pe
ee
ec
ch
h))
When an optional UT-102
SPEECH SYNTHESIZER UNIT
is installed, the synthesizer can be set to read out the
frequency/mode only, or both the frequency/mode
and S-meter level.
frequency/mode only, or both the frequency/mode
and S-meter level.
Voice synthesizer reads out
both the frequency/mode
and S-meter level (default).
both the frequency/mode
and S-meter level (default).
Voice synthesizer reads out
the frequency/mode only.
the frequency/mode only.
37 CI-V 731
((C
CII--V
V o
op
pe
erra
attiin
ng
g ffrre
e--
q
qu
ue
en
nc
cy
y d
da
atta
a lle
en
ng
gtth
h))
When connecting the IC-706MKIIG to the IC-735 for
transceive operation, you must change the operat-
ing frequency data length to 4 bytes.
transceive operation, you must change the operat-
ing frequency data length to 4 bytes.
• This item
MUST
be set to “on” only when operating trans-
ceiver with the IC-735.
Frequency data set to
5 bytes (default).
5 bytes (default).
Frequency data set to
4 bytes.
4 bytes.
36 CI-V TRN
((C
CII--V
V ttrra
an
ns
sc
ce
eiiv
ve
e))
Transceive operation is possible with the IC-
706MKIIG connected to other Icom HF transceivers
or receivers. When “on” is selected, changing the
frequency, operating mode, etc. on the IC-706MKIIG
automatically changes those of connected trans-
ceivers (or receivers) and vice versa.
706MKIIG connected to other Icom HF transceivers
or receivers. When “on” is selected, changing the
frequency, operating mode, etc. on the IC-706MKIIG
automatically changes those of connected trans-
ceivers (or receivers) and vice versa.
Transceive ON
(default)
(default)
Transceive OFF
34 CI-V ADDRES
((C
CII--V
V a
ad
dd
drre
es
ss
s))
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-706MKIIG’s address is 4EH.
its own Icom standard address in hexadecimal code.
The IC-706MKIIG’s address is 4EH.
When 2 or more IC-706MKIIG’s are connected to an
optional CT-17
optional CT-17
CI
-
V LEVEL CONVERTER
, rotate the
main dial to select a different address for each IC-
706MKIIG in the range 01H to 7FH.
706MKIIG in the range 01H to 7FH.
35 CI-V BAUD
((C
CII--V
V d
da
atta
a rra
atte
e))
This item sets the data transfer rate. When “Auto” is
selected, the baud rate is automatically set according
to the connected controller or remote controller.
selected, the baud rate is automatically set according
to the connected controller or remote controller.
Address set to 58H
(default).
(default).
Address set to 7FH.
Auto baud rate
(default)
(default)
19200 bps
IC-706MKIIG.qxd 02.3.27 13:53 Page 55