Omron hem-rml30 Manuale Utente

2

•  Use only the approved Blood Pressure Monitor 

for this cuff.

•  Do not wash the cuff or make it wet.

1. Put your left arm through the cuff loop.

Note:  If the cuff is not assembled, pass the end 

of the cuff furthest from the tubing through 
the metal D-ring to form a loop. The smooth 
cloth should be on the inside of the cuff loop.

2. Position the arm correctly.

1) The air tube should run down the inside of your 

forearm and be in line with your middle fi nger.

2) The bottom of the cuff should be approximately 

1 to 2 cm above your elbow.

3) Apply the cuff to your upper arm so that the 

marker (arrow under tube) is centered on the 
middle of your inner arm and points down the 
inside of the arm.

Notes:
•  Do not place the cuff over thick clothes and do 

not roll up your sleeve if it is too tight.

•  Align the cuff with the height of your heart (breast 

height). If necessary use a pillow or cushion.

Thank you for purchasing the OMRON Wide Range Cuff. Arm circumference for this cuff is 
22 to 42 centimeters. OMRON Wide Range Cuff can be connected to various OMRON Blood 
Pressure Monitors. Please refer to the original instruction manual of your Blood Pressure Mo-
nitor. Please check your present product as to which plug you must use. Connect the correct 
air plug to the air tube.