Moxa Technologies CP-104UL Manuale Utente

3-40

 

   Smartio CP-104UL User’s Manual 

Warning: loading /lib/modules/2.4.20-8/kernel/drivers/char/mxser.o will taint the kernel: no 
license 
See http://www.tux.org/lkml/#export-tainted for information about tainted modules 
MOXA Smartio/Industio family driver version 1.7 
Tty devices major number = 30, callout devices major number = 35 
Found MOXA CP-168U series board(BusNo=2,DevNo=13) 
Module mxser loaded, with warnings 

5.  You can use Moxa diagnostic utility to verify the driver status. 

 # cd /moxa/mxser/utility/diag 
 # ./msdiag 

 == MOXA Smartio/Industio Family Multiport Board Status Utility(1.1) == 
 Tty Device Major Number= 30. 
 Callout device Major Number= 35. 

Board 1 : CP-168U series (BusNo=2, DevNo=13) 
Port 1: 0xac00, max. baud rate = 230400 bps. 
Port 2: 0xac08, max. baud rate = 230400 bps. 
Port 3: 0xac10, max. baud rate = 230400 bps. 
Port 4: 0xac18, max. baud rate = 230400 bps. 
Port 5: 0xac20, max. baud rate = 230400 bps. 
Port 6: 0xac28, max. baud rate = 230400 bps. 
Port 7: 0xac30, max. baud rate = 230400 bps. 
Port 8: 0xac38, max. baud rate = 230400 bps. 

6.  You can use Moxa terminal utility to test tty port. 

# cd /moxa/mxser/utiltiy/term 
# ./msterm 

SCO 

The SCO driver for MOXA’s multiport serial boards supports the following products: 

!

 

Universal PCI Boards: CP-168U, CP-104UL, CP-104JU 

!

 

PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI 

!

 

ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS 

 

Follow the steps below to install the driver under SCO. Moxa provide the following SCO Version: 

!

 

!

 

!

 

 

The following steps are using CP-168U under SCO OpenServer as an example. If you want to 
install under SCO UnixWare 7 or SCO UnixWare 2.1, the installation procedures are similar as 
SCO OpenServer. 

 

1.  Copy the driver file .tar to your host. 

2.  #tar xvf <driver tar file>