Husqvarna 115 247227 R1 Manuale Utente

10

ASSEMBLY

Position upper chute support against bagger inlet, 

1. 

flush at outer edges. See Illustration.
Using support as a template, drill two 

2. 

3

/

8

 holes into 

bagger hood.

Secure upper chute support to hood with hex 

3. 

bolts, washers and nyloc nuts.

NOTE: Assistance from another person may 
ease mounting the cover assembly to mower.
Lift and rotate cover to align the cover brackets 

1. 

with support assembly tubes.
Slide the cover down over the support tubes until 

2. 

secure.

Remove plastic end caps from the center two bag 
support arms. fully insert spacer plugs into the ends 
of the support tubes. It may be necessary to tap the 
spacers into place with a hammer or mallet. Replace 
the plastic end cap back over the spacer. The 
additional extension will hold the hood more securely 
when latched.