ONKYO dv-cp802 Manuale Utente
23
Basic Playback
This section explains how to load discs.
Notes:
• You can load up to six discs. You don’t have to load all
• You can load up to six discs. You don’t have to load all
six discs every time.
• When the disc tray is closed, all of the disc indicators
appear until the DV-CP802 has checked each bay for
the presence of a disc. If a bay is found to have no disc,
the corresponding indicator disappears.
the presence of a disc. If a bay is found to have no disc,
the corresponding indicator disappears.
• The disc tray can be opened and closed even while the
DV-CP802 is in Standby mode, so you don’t have to
turn it on to remove your discs. (The disc tray will take
slightly longer to open.)
turn it on to remove your discs. (The disc tray will take
slightly longer to open.)
• The DV-CP802 supports 8 cm and 12 cm discs. To
avoid damaging your discs or the DV-CP802, always
place discs in the center of the disc bays.
place discs in the center of the disc bays.
• Only load discs that are supported by the DV-CP802
(see page 7). Don’t load cartridge-type discs.
• To avoid personal injury, keep your hands away from
the disc tray as it closes.
• Always use the OPEN/CLOSE [
] button to open
and close the disc tray. Never push the disc tray, and
don’t touch it or obstruct it while it’s opening or clos-
ing. Don’t press down on the disc tray while it’s open,
and don’t load anything other than supported discs.
Doing so may damage your discs or the DV-CP802.
don’t touch it or obstruct it while it’s opening or clos-
ing. Don’t press down on the disc tray while it’s open,
and don’t load anything other than supported discs.
Doing so may damage your discs or the DV-CP802.
Loading Discs
1
Press the OPEN/CLOSE [
]
button.
The disc tray opens and the six disc
number indicators appear on the dis-
play.
number indicators appear on the dis-
play.
2
Place a disc, label side up, into
each bay.
each bay.
3
Press the [DISC SKIP] button to
access the other disc bays.
The disc tray turns counterclockwise
two bays at a time.
access the other disc bays.
The disc tray turns counterclockwise
two bays at a time.
ON
STANDBY
SEARCH LAST M MEMORY CHAIN MODE
REPEAT
A-B
RANDOM
DISPLAY
MENU
SETUP
TOP MENU
RETURN
AUDIO
ANGLE SUBTITLE
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC SKIP
DIMMER
RC-521DV
STEP/SLOW
CLEAR
OPEN/
CLOSE
PROGRESSIVE
ENTER
+10
0
1
2
3
4
5
6
7
8
9
STANDBY/ON
STANDBY
PLAY/ENTER
OPEN/CLOSE
DISC SKIP
DISC1–6
DISC SKIP
DISC SELECT
VCD
CD
MP3
JPEG
DVD-V
DVD-A
SACD
DVD-VR
OPEN/
CLOSE
Remote controller
DISC SKIP
Remote controller
4
When you’ve finished, press the
OPEN/CLOSE [
OPEN/CLOSE [
] button again.
The disc tray closes.
See page 24 for information on select-
ing and playing discs.
ing and playing discs.
Tip: If you press the Play [
] button,
the disc tray will close and playback of
the disc in the right bay will start auto-
matically. If there is no disc in that bay,
the DV-CP802 will check the other
bays and play the first disc it finds.
the disc in the right bay will start auto-
matically. If there is no disc in that bay,
the DV-CP802 will check the other
bays and play the first disc it finds.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close and playback of the selected disc
will start automatically.
SELECT 1–6 buttons, the disc tray will
close and playback of the selected disc
will start automatically.
OPEN/
CLOSE
Remote controller