Hitachi 55EX9K Manuale Utente

HOOK-UP CABLES AND CONNECTORS 

 

13

Most video/audio connections between components can be made with 
shielded video and audio cables that have phono connectors. For best 
performance, video cables should use 75-Ohm coaxial shielded wire. 
Cables can be purchased from most stores that sell audio/video products. 
Below are illustrations and names of common connectors. 
Before purchasing any cables, be sure of the output and input connector 
types required by the various components. Also make sure the cables are 
the correct length. 

  

 

 

Coaxial 
This outdoor antenna cable must be connected to  

Connector 
an antenna adaptor (300-Ohm to 75-Ohm). 

 

For connecting RF 

signals (antenna or cable 
       TV) 

to 

the 

antenna 

jack 

on 

the television. 

 

 

 

 

Connector 
Used on all standard video and audio cables which   This connector is 
used on camcorders, VCRs, 
connect to inputs and outputs located on the    

and laser disc 

players with an S-Video feature 
Television's front and rear jack panels.   

 

in place of the 

standard video cable to produce 
       a 

high-quality 

picture.