Hitachi 42pd7a10 Manuale Utente

Picture Mode

Dynamic: This setting is best for very bright ambient lighting.
Natural: This setting is for normal lighting conditions.
Cinema: This setting is best for watching movie.

Contrast

Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding 

SELECT

button at [+31]. The colour for [+32] to [+40] numbers will change
from green to magenta. This special mode is better for dark scenes.
For normal viewing we recommend that the Contrast is set to [+31].
"Panel Life" in the Function Menu should be set to Normal when this
Contrast setting is adjusted.

Narrows the gap between
brightness and darkness.

Broadens the gap between
brightness and darkness.

Brightness

Black is subdued for
increased overall darkness.

Black is set off for increased
overall brightness.

Adjust to preference.

Colour Temperature

Normally set to Cool.

Dynamic

Natural

Cinema

Cool          Normal          Warm          Black / White

Off          On

Off         Low         Middle         High

Off          On

Off          On

Contrast Mode

Dynamic:Emphasizes the differences between video shadings to 

improve the feeling of contrast. 

Normal : The gradation of an image is reproduced as faithfully as 

possible.

Auto: Detects image brightness and automatically adjusts for natural

brightness.

Normal          Auto          Dynamic

Colour

Decrease colour intensity.

Increase colour intensity.

Adjust to preference.

Sharpness

Soft

Sharp

Shift to the minus (-) side for a softer effect and plus (+) for sharper
picture.

Reset

(off the function)

(waiting to reset)

Brighter scene is decreased
in reddish colour.

Brighter scene is increased in
reddish colour.

The original factory settings for the items of this Menu page can be
restored by pressing the OK button.

Hue

Enhances red and weakens
green.

Enhances green and weakens
red.

This is not available to adjust when receiving PAL/SECAM signal.
Then the character will be greyed out.
Adjust for most realistic skin colour.

PAL Comb Filter

This is available only when receiving a PAL composite signal. Turn
On to reduce the discolorations in fine picture detail and provides
purer colour.

YNR

Performs picture signal noise reduction. Turn up to reduce noise.

LTI

Adjusts the sharpness of the picture signal.

CNR

Performs colour signal noise reduction. Turn up to reduce noise.
And it will be fixed as Off only when selecting DVI-STB mode.

Colour Temp. Adjustment

Turn On when you wish to change colour temperature depending on
the user's preference.

Adjust colour temperature depending on the user’s preference. These
settings are independently stored in each of the 4 Colour Temperature
modes.

Off          Low          High

Film Mode

On:Automatically detects the movie film material and faithfully 
reproduces the original film image.
Off:Set to OFF when switching between images does not appear 
natural.

Off          On

CTI

Adjusts the sharpness of the colour signal.

Black Enhancement

Adjusts the black level compensation.

Auto Colour

This is available only when receiving an NTSC composite/S.Video
signal. This monitors and adjusts the colour to maintain constant
colour levels. It also maintains natural flesh tones whilst preserving
fidelity of background colours.

Red

Brighter scene is decreased
in greenish colour.

Brighter scene is increased in
greenish colour.

Green

Amplitude

Brighter scene is decreased
in bluish colour.

Brighter scene is increased in
bluish colour.

Blue

Dark scene is decreased in
reddish colour.

Dark scene is increased in
reddish colour.

Red

Dark scene is decreased in
greenish colour.

Dark scene is increased in
greenish colour.

Green

Cut Off

Dark scene is decreased in
bluish colour.

Dark scene is increased in
bluish colour.

Blue