Home Automation RC-1000 Manuale Utente
Getting to know your thermostat’s display (Advanced Display)
5
(1)
Temperature:
Displays the current indoor temperature.
(2)
Cool Setting:
Displays the desired cool setting.
(3)
Heat Setting:
Displays the desired heat setting.
(4)
Thermostat Mode:
Displays the current system mode: Off, Heat, Cool, Auto, or EM Heat (Emergency Heat for heat pump systems)
(5)
Status Indicators:
Cool 1
st
stage of air conditioning system is running
Heat 1
st
stage of heating system is running
Cool 1
st
and 2
nd
stage of air conditioning system is running
Heat 1
st
and 2
nd
stage of heating system is running
Note: The Status Indicators may flash to indicate a start up delay for equipment protection. After a few minutes, the compressor will start
and the Status Indicators will stop flashing.
(6)
Message Bar:
The message bar displays messages that you enable. If more than one message type is enabled, the message bar will display
the first message for 4 seconds, and then the next message is displayed. On the advanced display, the available message types are as follows:
Date and Time
Outdoor Status (outdoor temperature and/or outdoor humidity) Filter Reminder (time to change the filter)
Energy Status
Energy Messages
(7)
Hold Setting:
Displays the current hold setting: Off, On, or Vacation
(8)
Fan Setting:
Displays the current fan mode: Auto, On, or Cycle
(9)
Relative Humidity:
Displays the current relative humidity (RC-2000 only).
(10)
Period Indicator:
Morn, Day, Eve, or Night is displayed when scheduled temperature changes are made by the thermostat programs.