Roland VC-2 Manuale Utente
16
Try Out the Sound
(Patch mode)
1.
Press [MODE].
The VC-2 MODE MENU window appears.
2.
Touch <PATCH>.
The top screen appears.
* Please be aware that in the screen shots printed in this manual,
the patch names may differ from the factory settings.
When the VC-2 starts up, the top screen of Patch mode
will appear first.
will appear first.
From the other screens of Patch mode, you can move to
the top screen by touching
the top screen by touching
<Top>
at the bottom of the
screen.
1.
Access the top screen of Patch mode.
2.
Touch the patch number indication to highlight
it.
3.
Turn the VALUE dial or press [INC], [DEC].
You can switch more rapidly by holding down [SHIFT]
while you perform these operations.
while you perform these operations.
You can easily find the desired patch by selecting it from the
patch list.
patch list.
1.
Access the top screen of Patch mode.
2.
Touch the patch algorithm indication located in
the upper left of the screen. Alternatively, touch
<
▼
MENU> in the upper right of the screen and
then touch <PATCH List> in the pulldown
menu.
The PATCH List window appears.
3.
Select a patch from the list.
Either turn the
VALUE dial
or use
[INC]
,
[DEC]
to select a
patch. You can also select a patch by touching it on the
display.
display.
The on-screen keys have the following functions.
<P001–U192>
: Change the buttons at both edges of the
screen to P001–U192.
<U193–U448>
: Change the buttons at both edges of the
screen to U193–U448.
The Top Screen of Patch
Mode
Mode
Selecting a Patch
Selecting Patches with the VALUE dial
Selecting Patches from the List
vc2_for_XT_e1 16 ページ ２００５年３月８日 火曜日 午後４時５２分