Roland VC-2 Manuale Utente
23
Creating/Editing Patches (Patch mode)
2.
Touch <Compare> to turn it on.
Now you can play the patch that is in the currently
selected save destination.
selected save destination.
3.
Play the save-destination patch to make sure
that it’s one you don’t mind overwriting.
The patch auditioned using the Compare function may
sound slightly different than when it is played normally.
sound slightly different than when it is played normally.
4.
If you wish to change the save destination, re-
specify the save-destination patch by using the
VALUE dial.
5.
Touch <Execute> to execute the Save
operation.
1.
Make sure that you’ve selected the patch with
the controller settings you want to copy.
2.
Touch <
▼
MENU> in the upper right of the
screen.
A pulldown menu appears.
3.
In the pulldown menu, touch <PATCH Ctrl>.
The Patch Controller Copy window appears.
4.
Turn the VALUE dial to select the copy
destination.
If you select the same user patch for both FROM and TO
of the Destination, only that patch will be copied.
of the Destination, only that patch will be copied.
If you select different user patches for FROM and TO of
the Destination, the patches in that range will be copied.
the Destination, the patches in that range will be copied.
The copy operation will not be carried out if the copy-
destination patch is “INITPATCH.”
destination patch is “INITPATCH.”
The controller settings shown in the Source field will be
copied. This will depend on the patch algorithm. If the
patches in the Source field and Destination field use
different algorithms, only the settings they have in
common will be copied.
copied. This will depend on the patch algorithm. If the
patches in the Source field and Destination field use
different algorithms, only the settings they have in
common will be copied.
5.
Touch <Execute> to execute the Copy
operation.
1.
Make sure that the patch you wish to delete is
selected.
2.
Touch <
▼
MENU> in the upper right of the
screen.
A pulldown menu appears.
3.
In the pulldown menu, touch <PATCH Delete>.
The PATCH Delete List window appears.
4.
From the list, select the patch that you want to
delete.
Either turn the
VALUE dial
or use
[INC][DEC]
to select a
patch. You can also select a patch by touching it on the
display.
display.
The on-screen keys have the following functions.
<P001-U192>
: Change the buttons at both edges of the
screen to P001-U192.
<U193-U448>
: Change the buttons at both edges of the
screen to U193-U448.
<Algorithm>
: Change the buttons at both edges of the
screen to Patch Algorithm.
< << >
: Return to the preceding screen page.
< >> >
: Advance to the next screen page.
5.
Touch <Execute> to execute the Delete
operation.
You can’t delete preset patches.
Copying Patch Controller Settings
(Patch Controller Copy)
(Patch Controller Copy)
Deleting Patches (PATCH Delete)
vc2_for_XT_e1 23 ページ ２００５年３月８日 火曜日 午後４時５２分