OKI 70049401 Manuale Utente

The printer has only one slot in 
which to install an optional 
RAM Memory card.

1. Turn off the printer, and remove the 

power cord and interface cable.

2. On the back of the printer, loosen 

the access panel screw and remove 
the access panel.

3. Locate the slot for the card: 

4. Remove the RAM memory card 

from its packaging.

5. Hold the card with the gold contact 

edge down and the notched corner 
(

) aimed away from you. 

6. Insert the card in the slot—notched 

corner (

) away from you—and 

press down firmly until it snaps 
into place.
The blue tab (circled) will move up 
to the locked position.

7. Replace the access panel:

a. Align the tabs at the bottom of 

the access panel with the slots in 
the printer.

b. Swing the panel up and tighten 

the screw to secure it in place.

8. Reattach interface cord and power 

cable, then turn on the printer.

9. Print a MenuMap.

a. Press and release 

.

The printer goes off line.

b. Press and hold

 for at 

least 2 seconds, but no more that 
5 seconds.
The MenuMap Prints.

a. Press 

 one or more times 

until INFO.MENU appears on 
the display.

b. Press 

 twice.

10. Check the information at the top 

of the MenuMap:

– The Total Memory Size should 

equal the sum of the original 
printer memory plus the newly 
installed memory.

– If it does not, repeat the above 

steps and be sure the memory is in 
the correct slot and is pushed in 
completely.

– Then reprint the MenuMap and 

check the Total Memory Size 
again.

OKI is a registered trademark/marca registrada/marque déposée, Oki Electric Industry Company, Inc.

Oki 70042301(16MB)
Oki 70042401(32MB)
Oki 70047601(64MB)
Oki 70049301(128MB)
Oki 70049401(256MB)