Chevrolet camaro 2002 Manuale Utente

When the high beams are
on, this light located on the
instrument panel cluster
also will be on.

To change the headlamps from low beam to high or high
beam to low, pull the turn signal lever all the way
toward you. Then release it.

You can control the windshield wipers by turning the
band with the wiper symbol on it, located on the turn
signal/multifunction lever.

For a single wiping cycle, turn the band to MIST. Hold
it there until the wipers start, then let go. The wipers will
stop after one cycle. If you want more cycles, hold the
band on MIST longer.

You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain or
snow. Turn the band to choose the delay time. 
The closer to LO, the shorter the delay.

For steady wiping at low speed, turn the band away
from you to the LO position. For high

-

speed wiping,

turn the band further, to HI. To stop the wipers, turn 
the band to OFF.

Damaged wiper blades may prevent you from seeing
well enough to drive safely. To avoid damage, be sure to
clear ice and snow from the wiper blades before using
them. If they’re frozen to the windshield, carefully
loosen or thaw them. If your blades do become
damaged, get new blades or blade inserts.

Heavy snow or ice can overload your wipers. A circuit
breaker will stop them until the motor cools. Clear away
snow or ice to prevent an overload.