Maretron gps100 Manuale Utente

Pagina di 25
 
 
 
®
®
 
 
 
 
Revision 1.2 
 
Page 7
 
5 Troubleshooting 
If you notice unexpected operation of the Maretron GPS100, follow the troubleshooting 
procedures in this section to remedy simple problems. 
 
Symptom 
Troubleshooting Procedure 
No data output 
Check the connections to the NMEA 
2000
®
 connector and tighten if 
necessary 
 
Ensure that power is supplied to the 
connected NMEA 2000
®
 cable 
 
Ensure that the GPS100 has a clear 
view to the horizon in all directions 
 
Ensure that no VHF, satellite, or radar 
antennas have been mounted near the 
GPS100 
 
If these steps do not solve your problem, please contact Maretron Technical Support (refer to 
Section 7 for contact information). 
 
Warning: There are no user-serviceable components inside the Maretron GPS100.  Opening 
the GPS100 will expose the sensitive electronic components to adverse environmental 
conditions that may render the unit inoperative. Please do not open the GPS100, as this will 
automatically void the warranty. If service is required, please return the unit to an authorized 
Maretron service location. 
 
6 Technical Specifications 
Specifications 
Parameter 
Value 
Comment 
Position Accuracy (Autonomous) 
<10m 
2D RMS (95% of Data Falls Within 10m) 
Position Accuracy (WAAS) 
< 3m 
2D RMS (95% of Data Falls Within 3m) 
Channels 
12 
Simultaneous Tracking of 12 Satellites 
Position Update Rate 
10 per Second 
 
Speed Update Rate 
4 per Second 
 
Time Update Rate 
1 per Second 
 
Hot Start 
8 Seconds 
Start Within Hours of Last Power Down 
Warm Start 
38 Seconds 
Start Within Days of Last Power Down 
Cold Start 
45 Seconds 
Start from Unknown Position 
North America 
Europe 
Satellite Based Augmentation 
System 
WAAS 
EGNOS 
MSAS 
Asia 
Battery Backup 
Lithium (4-5 Days)  Holds Position for Hot/Warm Starts