Haier l32f6 Manuale Utente

Maintenance/Troubleshooting

Press 

5

/

6

 to select the Unlock option, and then 

press 



 to clear all the lock settings, namely set all 

the lock setting options as OFF; the Preset Channel 

is set as OFF and max volume returns to 100 (except 

password).

▲

It is no need for user to select the after-sale service 

option.

The diagrams in the following section are 

 

R

schematic and only for your reference. Please see 

the actual product if necessary.

Supported file formats:

A

Photo: *.jpg;

•

Music: *.mp3;

•

TEXT Reader: *.txt

•

Due to the particularity of file coding, some files 

 

R

may be unable to read.

Supported equipment:  

B

Support the USB flash disks that supports Mass 
Storage Protocol and whose file system is FAT32,  
If USB equipment could not be identified due 
to unsupported file system, please format the 
equipment to the above-mentioned file system.

To achieve smooth playing, ensure the following:

C

The file code rate should be lower than 300KB/S;

•

Due to the limitation of USB signal transmission 

•

distance, it is recommended not to use USB patch 

cord, in case of using the cord, make sure that its 

length is not over 1m;

Use high-speed USB equipment in conformity 

•

with USB2.0 full speed Interface Standard; If USB 

equipment in conformity with USB1.1 full speed 

Interface Standard is used, the playing may be 

unsmooth.

Press 

A

SOURCE on the remote control unit to select 

USB option.

Insert USB equipment into corresponding USB 

B

interface 2s after starting the system.

After entering the system menu, press 

C

3

/on the 

remote control unit to select the require USB files, 
press OK button to confirm the selection and enter 
the file list relative to the selection.

Press 

D

5

/6on the remote control unit to select the 

required file, press OK button to enter the selected file.

To exit the streaming media playing system and 

E

watch a TV program, you must press EXIT button to 
return to the streaming media main menu at first 
(to protect equipment), and then press SOURCE to 
select TV to return to the TV mode.

Under source of USB, when

 

▲

 press button MENU, 

screen goes black, except when images or movies 

are being played.

While playing the USB, press 

 

▲

EXIT button repeatly, 

the screen picture will return to USB main 

interface, and only at this time you can switch 
corresponding signal sources by pressing SOURCE 

again.

Please do not unplug the USB device when the 

 

▲

connected USB storage device is working. When such 

device is suddenly separated or unplugged, the stored 

files or the USB storage device may be damaged.

Press

A

3

/to scroll through main menu or submenu 

and select your desired option.

Press 

B

OK to confirm your selection.

Press 

C



/ to achieve the FWD (fast forward) and 

REV (fast back) of the option being played.

Press  

D

 to play, and press it again to pause playing.

Press 

E

ZOOM to magnify pictures; when the picture is 

enlarged, press 

3

/ 

and 

5

/6 

to move the picture.

Press 

F

EXIT repeatedly to return to the main menu.