Honeywell MS-9200UDLS Manuale Utente

Programming

MS-9200UDLS   PN 52750:A    11/04/05

69

To change the programming for the displayed module, press the keyboard down 
arrow key to view the following Edit Control screens: 

To Enable or Disable the control module, press the 1 key while viewing the Edit 
Control Screen #2.  Each press of the key will toggle the screen between Enabled 
Yes and Enabled No.  If Enabled No is selected, the module will not be polled by the 
control panel, preventing the module from activating its output devices.  The control 
panel will indicate a system trouble condition and the Disable LED will turn on if 
any devices are disabled.

EDIT CONTROL
1=ENABLED        YES
2=TYPE  CONTROL
3=SILENCEABLE    YES

EDIT CONTROL
1=WALKTEST       YES
2=ZONE ASSIGNMENT
    00 ** ** ** **

EDIT CONTROL
1=NOUN/ADJECTIVE
2=DESCRIPTION
********************

EDIT CONTROL
1=ENABLED
2=TYPE
3=SILENCEABLE

Edit Control Screen #2