Honeywell MS4980 Manuale Utente

 

 

8 

I

NSTALLATION

 

 

 

 
1.  Turn off the host device. 

 

2.  Plug the 15-pin socket end 

of the USB cable into the 15-pin  
D-Type connector on the MS4980 
(see page 4).

 

 

3.  Plug the USB end of the cable into the 

host’s USB port. 

 

4.  Turn on the host device. 

 

5.  The MS4980 will start to initialize.  

The white and blue LED will 
alternately fade on and off for 
approximately three seconds.  When 
the scanner has finished initializing, 
the unit will flash the white LED three 
times while simultaneously beeping 
three times.  The low intensity blue 
LED will remain turned on.  The 
scanner will automatically reboot after 
first initialization. 

 

 
 

Plugging the scanner into a port on the host system does not guarantee 
that scanned information will be communicated properly to the host 
system.  Please refer to the MetroSelect Single-Line Configuration 
Guide or MetroSet2’s help files for instructions on changing the 
scanner’s factory default configuration.  The scanner and host system 
must use the same communication protocols.