Kodak easyshare 5300 Manuale Utente

Chapter 4 

Two-sided Printing 

You can print on both sides of the paper. 

Watermark 
You can select or create a background watermark. 

Print Photos from a Camera 

1   

Connect your camera to the EasyShare AiO. The PictBridge logo is displayed on the LCD. 

 

2   

Load the photo tray with photo paper (See Load Photo Tray in Chapter 3). 

3   

Use your camera to select and print photos. 

Print Photos from the Control Panel 

The Photo Print mode is initiated by pressing the Photo button, inserting a memory card, or connecting a 
USB device to the Kodak EasyShare All-in-One. 

1   

Insert a memory card into the appropriate slot, a mass storage device into the USB port, or connect a 

digital camera to the USB port. The last photo is displayed. 

 

WARNING 

Never attempt to remove a memory card while it is being accessed. Doing so can damage 
files on the card. You can safely remove a card only when the status light next to the slots is 
not blinking. 

2   

Load the main tray (see Load Main Tray in Chapter 3) or photo tray (See Load Photo Tray in Chapter 3) 

with photo paper. 

NOTE:  The Photo Tray only supports 4x6 inch and 100x150 mm photo paper. 

3   

Press 

a

 to select the number of prints for this photo. 

4   

Press 

`

 to preview the next photo. 

TIP:  To select all the photos on a memory card or mass storage device, hold down the OK button for 2 

seconds. Holding down the OK button again for 2 seconds will de-select all the photos. 

5   

Repeat Steps 3 and 4 until you are finished selecting photos. 

6   

Press Start to print the selected photos or Photo to set print options. 

7   

Set print options. 

See Set Print Layout 

See Set Number of Prints 

See Set Color 

See Set Print Quality 

After a photo is printed, it is de-selected. 

32 

Kodak EasyShare 5300 AiO